1. Produktai
  2. KRUMPLIASTIEBIAI IR KRUMPLIARAČIAI
  3. Krumpliastebiai
APEX DYNAMICS_Public_Shop
Sort By: Featured

Krumpliastebiai

  • Krumpliastebiai
  • Dantračiai
  • Krumplestebių ir krumpliaračių priedai

0208R200C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02020-DIN8 YYC;
• CHTMQ02020-DIN8 YYC;
112,00 € 112.0 EUR
0206R150C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246023 GUDEL;
• 246123 GUDEL;
• CHTGH02010-DIN6 YYC;
• MHTG02010-DIN6 YYC;
194,40 € 194.4 EUR
0206R100C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246023 GUDEL;
• 246123 GUDEL;
• CHTGH02010-DIN6 YYC;
• MHTG02010-DIN6 YYC;
125,28 € 125.28 EUR
0206R050C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
050 - Lenght (500 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246022 GUDEL;
• 246122 GUDEL;
• CHTGH02005-DIN6 YYC;
• MHTG02005-DIN6 YYC;
75,60 € 75.60000000000001 EUR
0205R200C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
302,40 € 302.40000000000003 EUR
0205R150C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
224,64 € 224.64000000000001 EUR
0205R100C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
144,72 € 144.72 EUR
0106R150C10 Helical rack
Quality 6 / Carbon Steel

01 - Module
06 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.
164,16 € 164.16 EUR
01081100C10 Krumpliastiebis
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.
56,16 € 56.160000000000004 EUR
0205R100C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
144,72 € 144.72 EUR
0106R100C10 Krumpliastiebis
Quality 6 / Carbon Steel

01 - Module
06 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.
108,00 € 108.0 EUR
0208R175C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
175 - Lenght (1750 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
116,64 € 116.64 EUR
0208R150C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
92,88 € 92.88 EUR
0205R200C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
302,40 € 302.40000000000003 EUR
1J08R200C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM01510-DIN8 YYC;
• CHTMQ01510-DIN8 YYC;
116,64 € 116.64 EUR
1J06R050C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246012 GUDEL;
• 246112 GUDEL;
• CHTGH01505-DIN6 YYC;
• MHTG01505-DIN6 YYC;
64,80 € 64.8 EUR