APEX DYNAMICS_Public_Shop
Sort By: Featured
  • KRUMPLIASTIEBIAI IR KRUMPLIARAČIAI
  • REDUKTORIAI
  • MOVOS
0208R200C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02020-DIN8 YYC;
• CHTMQ02020-DIN8 YYC;
135,52 € 135.52 EUR
1J08R200C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM01510-DIN8 YYC;
• CHTMQ01510-DIN8 YYC;
130,68 € 130.68 EUR
1J08R100C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM01510-DIN8 YYC;
• CHTMQ01510-DIN8 YYC;
70,57 € 70.57000000000001 EUR
1J08R050C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM01510-DIN8 YYC;
• CHTMQ01510-DIN8 YYC;
39,20 € 39.2 EUR
1J06R100C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246013 GUDEL;
• 246113 GUDEL;
• CHTGH01510-DIN6 YYC;
• MHTG01510-DIN6 YYC;
130,68 € 130.68 EUR
1J06R050C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246012 GUDEL;
• 246112 GUDEL;
• CHTGH01505-DIN6 YYC;
• MHTG01505-DIN6 YYC;
78,41 € 78.41 EUR
0806R200C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246084 GUDEL;
• CHTGH08020-DIN6 YYC;
• MHTG08020-DIN6 YYC;
1.264,98 € 1264.98 EUR
0806R100C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246083 GUDEL;
• CHTGH08010-DIN6 YYC;
• MHTG08010-DIN6 YYC;
601,13 € 601.13 EUR
0605R100C10 Helical rack
Quality 5 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246063-Q5 GUDEL;
• CHTGH06010-DIN5 YYC;
415,56 € 415.56 EUR
0508R200C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM05020-DIN8 YYC;
• CHTMQ05020-DIN8 YYC;
436,47 € 436.47 EUR
0508R100C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM05010-DIN8 YYC;
• CHTMQ05010-DIN8 YYC;
209,09 € 209.09 EUR
0406R200C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246053 GUDEL;
• 246153 GUDEL;
• CHTGH04010-DIN6 YYC;
• MHTG04010-DIN6 YYC;
465,22 € 465.22 EUR
0406R100C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246054 GUDEL;
• 246154 GUDEL;
• CHTGH04020-DIN6 YYC;
• MHTG04020-DIN6 YYC;
216,93 € 216.93 EUR
0405R200C10 Helical rack
Quality 5 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246053-Q5 GUDEL;
• CHTGH04010-DIN5 YYC;
535,79 € 535.79 EUR
0405R100C10 Helical rack
Quality 5 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246053-Q5 GUDEL;
• CHTGH04010-DIN5 YYC;
248,29 € 248.29 EUR
038HR200Q10 Helical rack
Quality 8H / Q&T Alloy Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8H” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157043 GUDEL;
• CHTM03020-DIN8 YYC;
• CHTMQ03020-DIN8 YYC;
269,20 € 269.2 EUR
038HR100Q10 Helical rack
Quality 8H / Q&T Alloy Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8H” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157043 GUDEL;
• CHTM03010-DIN8 YYC;
• CHTMQ03010-DIN8 YYC;
143,75 € 143.75 EUR
0306R200C10 Helical rack
Quality 6 / Carbon Steel

03 - Module
06 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246044 GUDEL;
• 246144 GUDEL;
• CHTGH03020-DIN6 YYC;
• MHTG03020-DIN6 YYC;
360,68 € 360.68 EUR
0306R100C10 Helical rack
Quality 6 / Carbon Steel

03 - Module
06 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246043 GUDEL;
• 246143 GUDEL;
• CHTGH03010-DIN6 YYC;
• MHTG03010-DIN6 YYC;
172,50 € 172.5 EUR
0210R200C10 Helical rack
Quality 10 / Carbon Steel

02 - Module
10 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 10” are recommended for the following applications:
• Lifting axis;
• Automatic loading system;
• Robots;
• Outdoor application.

Analog:
• CHTMH02020-DIN10 YYC;
190,79 € 190.79 EUR
0210R100C10 Helical rack
Quality 10 / Carbon Steel

02 - Module
10 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 10” are recommended for the following applications:
• Lifting axis;
• Automatic loading system;
• Robots;
• Outdoor application.

Analog:
• CHTMH02010-DIN10 YYC;
99,32 € 99.32000000000001 EUR
0208R175C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
175 - Lenght (1750 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
141,13 € 141.13 EUR
0208R150C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
112,38 € 112.38 EUR
0208R100C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
70,18 € 70.18 EUR
0206R200C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246024 GUDEL;
• 246124 GUDEL;
• CHTGH02020-DIN6 YYC;
• MHTG02020-DIN6 YYC;
295,24 € 295.24 EUR
0206R175C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
175 - Lenght (1750 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246023 GUDEL;
• 246123 GUDEL;
• CHTGH02010-DIN6 YYC;
• MHTG02010-DIN6 YYC;
282,27 € 282.27 EUR
0206R150C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246023 GUDEL;
• 246123 GUDEL;
• CHTGH02010-DIN6 YYC;
• MHTG02010-DIN6 YYC;
235,22 € 235.22 EUR
0206R100C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246023 GUDEL;
• 246123 GUDEL;
• CHTGH02010-DIN6 YYC;
• MHTG02010-DIN6 YYC;
151,59 € 151.59 EUR
0206R050C10 Helical rack
Quality 6 / Carbon Steel

02 - Module
06 - Quality
R - Teeth angle (right-hand helical)
050 - Lenght (500 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246022 GUDEL;
• 246122 GUDEL;
• CHTGH02005-DIN6 YYC;
• MHTG02005-DIN6 YYC;
91,48 € 91.48 EUR
0205R200C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
365,90 € 365.90000000000003 EUR
0205R150C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
271,81 € 271.81 EUR
0205R100C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
175,11 € 175.11 EUR